The Netgear Nighthawk R7000P WiFi Router connects the wifi speed in the booster wifi range and you enjoy all your network because the Netgear R7000P wifi extender speeds up to 2300 Mbps. provide best-in-class security for all the internet-connected devices in your house or office with the Nighthawk R7000P WiFi Router. That device is a dual-band device. You get 2 LAN ports in that device as well you connect this device wirelessly. You also get the reset button and WPS button into the device. Three advanced Antennas and amplifier chips boost the network speed. The R7000p wifi router can connect to multiple devices. The router weight is 750 gm and it is originated by the china company.

Way of connecting the Netgear Nighthawk R7000P with the wifi device.

You can join the router and the wifi with two methods wired and wireless so connect it.

Wired way;

1. To wired connection an ethernet cable
2. Attach the ethernet cable into the router LAN port.
3. Next, connect it to the wifi ethernet port. 
4. After waiting for a few moments. 
5. If they’re on the route a LEN light blinks so it means your router attaches to the wifi successfully.

Wireless method:

1. First, you place the Nighthawk R7000P WiFi Router near your wifi.
2. Now power on the wifi.
3. Power on the router.
4. Then press the WPS button of the router. After that LED in digester flesh on the router.
5. Finally, the router connects successfully with the wifi.

How do you log in to the  Netgear Nighthawk R7000P Wireless Router wirelessly?

Login is an important process to set up the router so after connecting with the wifi so late start login.

• To login to the Nighthawk R7000P WiFi Router open any web browser. Enter the IP 192.168.10.1  in the URL bar.
• Then the Netgear router login window is displayed.
• After that type the router username and password into the filer.
• Note; the router default password and username you get on the label in the bake of the router.
• After that verify the router code.
• Next, tap on the login option. 

What can I do when there is no password label on the back of the router?

If there is no label for the username and password, I’m telling you that the router’s default password is “admin”. If it is showing you wrong, the device needs to reset. For resetting it.  You need to press the reset button of your router. Then wait for a few moments. Then a resetting process is finished after the router LED light flesh.

How to configure the wifi router with pc?

• First, power on the NETGEAR router. Then a LEN light flesh on the router.
• After that on the computer or pc. 
• Next, open the wifi connection manager on it.
• Locate the Netgear wifi router name on it.
• Now center on it and type the password into the filer bar.
• After that click on the connect option and connect it. After that, you log in to it.

To set up the Netgear Nighthawk R7000P WiFi Router password, what should I do?

To set up a password-

1. Open the internet web browser on the computer.
2. Then Netgear nighthawk router login page opens with the help of an IP address 192,168.10.1.
3. Next enter the default password and username of the router “admin” and push on the login option.
4. On the status page tap on the wireless section.
5. Now enter the new SSID of your router if you want and push the ‘ok’ option.
6. Next, type the old password and then create a new password for the router security.
7. Then apply the password to the press apply option.
8. Note: if you want to change another setting you also change it. After pressing the apply button all the changes made will be saved.

Nighthawk R7000P WiFi Router Firmware Update Process?

1. Connect the device to a laptop or computer to update the router’s firmware.
2. Next from the router manufacturer’s website download the firmware update.
3. Then you need to log in to the device.
4. Now in the home select the download all the updates for your modem. 
5. To apply it, reboot the device. Note: (to reboot unplug the router. after some time plug it again).
6. You did this procedure to upgrade.